| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Park Assist/Monitoring | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001PYC00ZX |
| Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear Side): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
|
(a) Install the ultrasonic sensor retainer to the rear bumper. NOTICE:
Do not damage the bumper with the snap when installing the retainer. HINT:
When installing the retainer, align the keyhole and snap as shown in the illustration. |
2. INSTALL NO. 1 ULTRASONIC SENSOR
|
(a) Engage the 2 claws and install the ultrasonic sensor. |
(b) Connect the sensor connector.
3. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
|
(a) Install the ultrasonic sensor retainer to the rear bumper. NOTICE:
Do not damage the bumper with the snap when installing the retainer. HINT:
When installing the retainer, align the keyhole and snap as shown in the illustration. |
4. INSTALL NO. 2 ULTRASONIC SENSOR
|
(a) Engage the 2 claws and install the ultrasonic sensor. |
(b) Connect the connector.
5. INSTALL REAR BUMPER COVER
6. INSTALL REAR QUARTER PANEL MUDGUARD LH
7. INSTALL REAR QUARTER PANEL MUDGUARD RH
HINT:
Use the same procedure as for the LH side.
|
|